New Ct-Test; New Mr-Test; New Quick-Test - Omicron Lab CT Analyzer User Manual

5.3

New CT-Test

By selecting "New CT-Test" in the main menu and then pressing the OK soft
How to get there:
key, a new CT test with the default parameter settings is loaded and displayed
Press the Main soft key in
in the CT-Object card. Some of the default values can be defined in the default
any test card
test settings (see section 5.7 on page 65).
Main Menu:
- New CT-Test
OK soft key
-> CT-Object card
Figure 5-5
Note: For more detailed information about the parameters and fields in the
CT-Object card, please refer to section 6.2 on page 80.
5.4

New MR-Test

Using the "New MR-Test" option in the main menu you can initialize a new multi-
How to get there:
ratio CT test using the optional CT SB2 switch box.
Press the Main soft key in
any test card
This option is only available if you have purchased a corresponding license. For
Main Menu:
more detailed information about multi-ratio CT testing using the CT SB2, please
- New MR-Test
refer to the CT SB2 User Manual.
OK soft key
-> CT-Object card
5.5

New Quick-Test

Using the "New Quick-Test" option in the main menu you can open the optional
How to get there:
QuickTest feature. With this feature you can use the CT Analyzer as a
Press the Main soft key in
multimeter or perform polarity checks using the CPOL polarity checker.
any test card
Main Menu:
This option is only available if you have purchased a corresponding license. For
- New Quick-Test
more detailed information about QuickTest, please refer to chapter 8 on
OK soft key
page 135.
-> CT-Quick card
Operating and Configuring the CT Analyzer
CT-Object card with default test settings after initializing a new
CT test
61