Omicron Lab CT Analyzer User Manual page 146

CT Analyzer User Manual
144
Soft key / Description
result
Crest Out, Crest factor of the output signal or the signal measured at input
Crest Sec, sec or input prim.
Crest Prim
The crest factor is the peak/rms ratio of a waveform. For a
sinusoidal waveform the crest factor is 1.414 (√2). The crest
factor may indicate possible signal distortion.
More detailed information can be found at
http://en.wikipedia.org/wiki/Crest_factor.
Note: The results for R
equivalent circuit diagram, the results for R
the serial equivalent circuit diagram.
Use the following wiring (examples):
Figure 8-5 Wiring examples for Advanced measurement type
, X and L (C ) are calculated using the parallel
p p p p
, X
s s
and L (C ) are calculated using
s s