Omicron Lab CT Analyzer User Manual page 66

CT Analyzer User Manual
How to get there:
Press the Main soft key in
any test card
Main Menu:
- File Handling
Select soft key
File Menu:
- Save As
How to get there:
Press the Main soft key in
any test card
Main Menu:
- File Handling
Select soft key
File Menu:
- Copy File(s) or
- Cut File(s)
64
Saving a file
1. Open the file menu and select Save As.
Note: You can also save a file by pressing the Save or the Save As soft key
in the CT-Object card.
2. Navigate to the desired folder in the file system where you want to save the
file:
• If you like to save the file with the same name, press the Save soft key. A
warning will pop up asking whether the existing file should be overwritten
or not.
• If you want to use a similar file name as an existing one in the selected
folder, select this file using the
Save As soft key or the
selected file name is added. Edit this file name and then press again
Save, Save As or the
Note: The test results and settings of each test finished with the "Test ok" status
are automatically stored to the file OMICRON\AutoSave\CTAnalyzer.xml on
the Compact Flash card. The existing CTAnalyzer.xml file is overwritten with
each successful test. Tests that could not be finished successfully or that were
aborted by the user are not stored and thus do not overwrite the existing
CTAnalyzer.xml file.
Copying / cutting and pasting a file on the Compact Flash card
Note: Copying / cutting and pasting folders is not possible with the CT Analyzer.
1. Open the file menu and select Copy File(s) or Cut File(s).
2. The file system card appears. Navigate to the desired file you want to copy
or cut.
3. Highlight the file and then press the Copy (or Cut) soft key.
To go back to the main menu without copying or cutting a file, press Abort.
Note: To select several neighboring files at a time, keep the
pressed while selecting the files using the
4. The file system card is closed and the file menu is displayed. Select
Paste File(s).
5. The file system card appears again. Navigate to the desired location in the
file system where you want to paste the file.
6. Press the Paste soft key to paste the file.
In case of a cut/paste action, the file is not deleted from its old location until
it has been pasted at its new location.
cursor keys and press the
key. A new *.xml file entry with the
key.
cursor keys.
key