Table of Contents
Advertisement
OTMC 100 Quick Start Guide
1
Introduction
1.1
About this Quick Start Guide
This OTMC 100 Quick Start Guide provides short information on how to install and access OTMC 100.
It is intended as an aid for the user to install OTMC 100 and take it into operation quickly and easily.
The OTMC 100 Quick Start Guide thus provides only a small subset of information available for
OTMC 100. It cannot substitute the OTMC 100 Series User Manual.
Therefore, also read the OTMC 100 Series User Manual which is available in PDF format on the
CD ROM delivered with OTMC 100 in addition to this Quick Start Guide. The OTMC 100 Series User
Manual provides extensive and more detailed information about OTMC 100, its installation and
intended use, and how to configure and operate it.
1.2
About OTMC 100
OTMC 100 is an antenna-integrated GPS controlled time reference. It provides high-precision time to
synchronize intelligent electronic devices (IEDs), computers and measurement equipment in Ethernet
(TCP/IP) based networks. The OTMC 100 series products can be used as a PTP (Precision Time
Protocol) grandmaster clock according to the IEEE 1588-2008 standard and as an NTP (Network
Time Protocol) time server for NTPv4 compliant equipment according to RFC 5905.
OTMC 100 is designed for outdoor use in lightning protected areas. It is intended for fixed installation
on masts. For installation requirements, please refer to chapter "Mounting" on page
OTMC 100 Series User Manual.
1.3
General safety instructions
Before operating OTMC 100, carefully read the following general safety instructions:
•
OTMC 100 may only be used in a safe technical condition taking into account its defined purpose,
safety requirements and possible risks as well as the operating instructions given in the
OTMC 100 Series User Manual.
•
OTMC 100 is exclusively intended for the application areas specified in chapter "Introduction and
designated use" of the OTMC 100 Series User Manual. The manufacturer or the distributors are
not liable for damage resulting from unintended usage. The user alone assumes all responsibility
and risks.
•
Do not open OTMC 100. Opening the device invalidates all warranty claims.
4
8
or to the
OMICRON
Advertisement
Table of Contents
