Siemens SINUMERIK 828D Function Manual page 671

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Activation of the workpiece counter $AC_SPECIAL_PARTS:

MD27880 $MC_PART_COUNTER = 'H3000'

MD27882 $MC_PART_COUNTER_MCODE[2] = 77

$AC_SPECIAL_PARTS is active.

The following takes place with every M77: $AC_SPECIAL_PARTS + 1

Deactivation of the workpiece counter $AC_ACTUAL_PARTS:

MD27880 $MC_PART_COUNTER = 'H200'

MD27882 $MC_PART_COUNTER_MCODE[1] = 50

$AC_ACTUAL_PARTS is inactive

Activation of all counters:

MD27880 $MC_PART_COUNTER = 'H3313'

MD27882 $MC_PART_COUNTER_MCODE[0] = 80

MD27882 $MC_PART_COUNTER_MCODE[1] = 17

MD27882 $MC_PART_COUNTER_MCODE[2] = 77

$AC_REQUIRED_PARTS is active

Display alarm at: $AC_REQUIRED_PARTS == $AC_SPECIAL_PARTS

$AC_TOTAL_PARTS is active; the counter is incremented by the value 1 with each M02.

$MC_PART_COUNTER_MCODE[0] has no significance.

$AC_ACTUAL_PARTS is active; the counter is incremented by a value of "1" with each M17.

$AC_SPECIAL_PARTS is active; the counter is incremented by a value of "1" with each M77.

Workpiece counter $AC_ACTUAL_PARTS is not processed during the program test/block search:

MD27880 $MC_PART_COUNTER = 'H700'

MD27882 $MC_PART_COUNTER_MCODE[1] = 75

$AC_ACTUAL_PARTS is active; the counter is incremented by a value of "1" with each M75, apart from

during the program test and search.

Basic Functions

Function Manual, 09/2011, 6FC5397-0BP40-2BA0

K1: Mode group, channel, program operation, reset response

9.16 Program runtime / Part counter

Sinumerik 840d sl