Functions - Leica tps1100 Reference Manual

GeoCOM Reference Manual
Search Spiral
struct AUT_SEARCH_SPIRAL
{
double dRangeHz;
double dRangeV;
}
Search Area
struct AUT_SEARCH_AREA
{
double dCenterHz;
double dCenterV;
double dRangeHz;
double dRangeV;
BOOLE bEnabled;
}
7.3

FUNCTIONS

7.3.1 AUT_ReadTol - Read current setting for the positioning tolerances
AUT_ReadTol..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... 9008
9008 ......................................................................................................................................................................................AUT_ReadTol
C-Declaration
AUT_ReadTol(AUT_POSTOL &TolPar)
VB-Declaration
VB_AUT_ReadTol(TolPar As AUT_POSTOL)
ASCII-Request
%R1Q,9008:
ASCII-Response
%R1P,0,0:RC,Tolerance Hz[double],Tolerance V[double]
Remarks
This command reads the current setting for the positioning tolerances of the
Hz- and V- instrument axis.
TPS1100 - Version 1.05
// width of spiral [rad]
// maximal height of spiral [rad]
// Hz angle of spiral - center
// V angle of spiral - center
// width of spiral [rad]
// maximal height of spiral [rad]
// TRUE: user defined spiral is active
Automation - AUT
7-10