Leica tps1100 Reference Manual page 145

GeoCOM Reference Manual
VB-Declaration
VB_SUP_GetConfig(LowTempOnOff As Long,
ASCII-Request
%R1Q,14001:
ASCII-Response
%R1P,0,0:RC,LowTempOnOff[long], AutoPower[long], Timeout[long]
Remarks
The returned settings are power off configuration and timing.
Parameters
LowTempOnOff
AutoPower
Timeout
Return-Codes
RC_OK
See Also
SUP_SetConfig
SUP_SwitchLowTempControl
Example
see
SUP_SetConfig
TPS1100 - Version 1.05
AutoPower As Long,
Timeout As Long)
out
Current state of the low temperature
control flag. If the
automatically turns off when internal
temperature fall short of
o
-24 C.
out
Current activated shut down mechanism
out
The timeout in ms. After this time the
device switches in the mode defined by the
value of
(press a key, turn the device or
communication via GeoCOM) occurs.
Execution always successful.
state=ON
when no user activity
AutoPower
Supervisor - SUP
the device
15-2