Leica tps1100 Reference Manual page 167

GeoCOM Reference Manual
TMC_NO_FULL_
CORRECTION
TMC_ACCURACY_
GUARANTEE
TMC_ANGLE_OK
TMC_ANGLE_NO_
FULL_
CORRECTION
TMC_ANGLE_
ACCURACY_
GUARANTEE
TMC_DIST_ERROR
TMC_DIST_PPM
TPS1100 - Version 1.05
Theodolite Measurement and Calculation - TMC
The results are not corrected by all active sensors.
Angle and distance data are available.
In order to secure witch correction is missing use the
both functions
TMC_IfDataAzeCorrError
TMC_IfDataIncCorrError.
This message is to be considers as warning.
Accuracy is not guaranteed, because the result
consisting of measuring data which accuracy could
not be verified by the system. Angle and distance
data are available.
You can perform a forced incline measurement or
switch off the incline.
This message is to be considers as info.
Angle measuring data are valid, but no distance data
are available.
(Possible reasons are:
-time out period to short
-target out of view)
This message is to be considers as warning.
Angle measuring data are valid, but not corrected by
all active sensors. The distance data are not
available.
(Possible reasons are:
-see return code
This message is to be considers as warning.
Angle measuring data are valid, but the accuracy is
not guarantee, because the result (angle) consisting
of measuring data, which accuracy could not be
verified by the system. The distance data are not
available.
(Possible reasons are:
-see return code
This message is to be considers as info.
Because of missing target point no distance data are
available, but the angle data are valid respectively
available.
Aim target point and try it again.
No distance measurement respectively no distance
)
TMC_ANGLE_OK
)
TMC_ANGLE_OK
and
16-19