Leica tps1100 Reference Manual page 157

GeoCOM Reference Manual
TMC_ANGLE_OK
TMC_ANGLE_ACCURACY_
GUARANTEE
TMC_ANGLE_NO_FULL_
CORRECTION
TMC_DIST_ERROR
TMC_DIST_PPM
TMC_ANGLE_ERROR
TMC_BUSY
RC_ABORT
RC_SHUT_DOWN
See Also
TMC_DoMeasure
TMC_IfDataAzeCorrError
TMC_IfDataIncCorrError
Example
RC_TYPE
TMC_COORDINATE
TPS1100 - Version 1.05
Theodolite Measurement and Calculation - TMC
Angle values okay, but no valid distance.
Co-ordinates are not available.
No distance data available but angle data
are valid. The return code is equivalent to
the
TMC_ACCURACY_GUARANTEE
relates to the angle data. Co-ordinates are
not available.
No distance data available but angle data
are valid. The return code is equivalent to
the
TMC_NO_FULL_CORRECTION
relates to the angle data. Co-ordinates are
not available.
Perform a distance measurement first
before you call this function.
No measuring, because of missing target
point, co-ordinates are not available.
Aim target point and try it again
No distance measurement respectively no
distance data because of wrong EDM
settings. The co-ordinates are not
available.
Set EDM -ppm and -mm to 0.
Problems with angle res. incline sensor. A
valid angle could not be measured.
At repeated occur call service.
TMC resource is locked respectively
TMC task is busy.
Repeat measurement.
Measurement through customer aborted.
System power off through customer.
Result;
Coordinate;
and
and
16-9