Table of Contents
Advertisement
GeoCOM Reference Manual
RC_OK
AUT_RC_ANGLE_ERROR
AUT_RC_BAD_ENVIRONMENT
AUT_RC_CALACC
AUT_RC_DETECTOR_ERROR
AUT_RC_DETENT_ERROR
AUT_RC_DEV_ERROR
AUT_RC_INCACC
AUT_RC_MOTOR_ERROR
AUT_RC_MULTIPLE_TARGETS
AUT_RC_NO_TARGET
AUT_RC_TIMEOUT
BAP_CHANGE_ALL_TO_DIST
TMC_ACCURACY_GUARANTEE
TMC_ANGLE_ACCURACY_
GUARANTEE
TMC_ANGLE_ERROR
TMC_ANGLE_NO_FULL_
CORRECTION
TMC_ANGLE_OK
TMC_BUSY
TMC_DIST_ERROR
TMC_DIST_PPM
TMC_NO_FULL_CORRECTION
TPS1100 - Version 1.05
Basic Applications - BAP
Measurement executed successfully
Angle measurement error
Bad Environment conditions
ATR-calibration failed
Error in target acquisition
Positioning not possible due to
mounted EDM
Deviation measurement error
Position not exactly reached
Motorization error
Multiple targets detected
No target detected
Position not reached
No prism has been found during
distance measurement with ATR,
command changed from "
"
"
Dist
Info, accuracy cannot be guaranteed
Info, only angle measurement valid,
accuracy cannot be guaranteed
Error, no valid angle measurement
Warning, only angle measurement
valid, accuracy cannot be guaranteed
Warning, only angle measurement
valid
Error, TMC submodule already in use
by another subsystem, command not
processed
An error occurred during distance
measurement.
Error, wrong setting of PPM or MM
on EDM
Warning, measurement without full
correction
" to
All
8-11
Hide quick links:
Advertisement
Table of Contents
