Leica tps1100 Reference Manual page 60

GeoCOM Reference Manual
Deactivate ATR mode:
The ATR mode is deactivated and the LOCK mode keep unchanged.
This command is valid for TCA instruments only. It replaces the function
AUT_GetAtrStatus
Parameters
OnOff
Return-Codes
RC_OK
RC_NOT_IMPL
See Also
AUS_GetUserAtrState
AUS_GetUserLockState
AUS_SetUserLockState
Example
see AUS_GetUserAtrState
6.3.3 AUS_GetUserLockState - Get the status of the lock switch
AUS_GetUserLoc kState..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... 18008
18008 ...............................................................................................................................................................................................................................................................AUS_GetUserLoc kState
C-Declaration
AUS_GetUserLockState(ON_OFF_TYPE &OnOff)
VB-Declaration
VB_AUS_GetUserLockState(OnOff As Long)
ASCII-Request
%R1Q,18008:
ASCII-Response
%R1P,0,0:RC, OnOff[long]
Remarks
This command gets the current LOCK switch. This command is valid for
TCA instruments only and does not indicate whether the ATR has a prism
in lock or not.
With the function
target is locked or not.
This command is valid for TCA instruments only. It replaces the function
AUT_GetLockStatus
TPS1100 - Version 1.05
.
in
State of the ATR mode
Execution successful.
ATR not available; no TCA instrument.
MOT_ReadLockStatus
.
you can find out whether a
Alt User - AUS
6-3