Leica tps1100 Reference Manual page 195

GeoCOM Reference Manual
VB-Declaration
VB_TMC_GetSimpleCoord(
ASCII-Request
%R1Q,2116:WaitTime[long],eProg[long]
ASCII-Response
%R1P,0,0:RC,dCoordE[double], dCoordN[double], dCoordH[double]
Remarks
This function get the cartesian co-ordinates if a valid distance existing. The
parameter
distance. If after the wait time not a valid distance existing, the function
initialise the parameter for the co-ordinates (
error. For the co-ordinate calculate will require incline results. With the
parameter
calculate or to measure it anew explicitly. We recommend to use the third
variant, let the system determined (see parameters).
Parameters
WaitTime
eProg
TPS1100 - Version 1.05
Theodolite Measurement and Calculation - TMC
defined the max wait time in order to get a valid
WaitTime
you have the possibility the incline results either to
eProg
in Max. wait time to get a valid distance [ms]
in Incline measuring program
TMC_MEA_INC
Incline will explicit measured, the execution time
for the function will so drastic increased
respectively the measure rate will be slow down.
Note: If you need a high accuracy then use this
program:
TMC_PLANE_INC
incline will be calculated, this variant is the fastest
way to get the co-ordinates.
Note: If you need a high measure rate and the
station got a high stability on tilting use this
program.
TMC_AUTO_INC
the system decides whether the incline must be
calculated or measured.
ByVal WaitTime As Long,
dCoordE As Double,
dCoordN As Double,
dCoordH As Double,
ByVal eProg As Long)
E,N,H
:
:
:
) with 0 and returns a
16-47