Leica tps1100 Reference Manual page 213

GeoCOM Reference Manual
RetCodeName
ATA_SLDR_DATA_ ERROR 533
ATA_SLDR_CHK_SUM_
ERROR
ATA_SLDR_ADDRESS_
ERROR
ATA_SLDR_INV_
LOADFILE
ATA_SLDR_
UNSUPPORTED
EDM
RetCodeName
EDM_SYSTEM_ERR
EDM_INVALID_COMMAND
EDM_BOOM_ERR
EDM_SIGN_LOW_ERR
EDM_DIL_ERR
EDM_SIGN_HIGH_ERR
EDM_DEV_NOT_
INSTALLED
EDM_NOT_FOUND
EDM_ERROR_RECEIVED
EDM_MISSING_SRVPWD
EDM_INVALID_ANSWER
EDM_SEND_ERR
TPS1100 - Version 1.05
Value Hex
534
535
536
537
768
Value Hex
769
770
771
772
773
774
778
779
780
781
782
783
Description
0x215 Unexpected data format received.
0x216 Checksum error in transmitted data.
0x217 Address out of valid range.
0x218 Firmware file has invalid format.
0x219 Current (loaded) Firmware doesn't
support upload.
0x300
Description
0x301 Fatal EDM sensor error. See for the
exact reason the original EDM
sensor error number. In the most
cases a service problem
0x302 Invalid command or unknown
command, see command syntax.
0x303 Boomerang error.
0x304 Received signal to low, prism to far
away, or natural barrier, bad
environment, etc.
0x305 DIL distance measurement out of
limit.
0x306 Received signal to strong, prism to
near, stranger light effect.
0x30A Device like EGL, DL is not installed.
0x30B Search result invalid. For the exact
explanation see in the description of
the called function.
0x30C Communication ok, but an error
reported from the EDM sensor.
0x30D No service password is set.
0x30E Communication ok, but an
unexpected answer received.
0x30F Data send error, sending buffer is
full.
Return Codes
A-4