Power Functions - Leica TS10 User Manual

Connect to PC via USB
cable step-by-step
4.3
Turning the
instrument on
Power options menu
Operation
7. The InstallShield Wizard Completed window appears.
8. Click Finish to exit the wizard.
1. Start the PC.
2. Plug the cable into the instrument.
3. Turn on the instrument.
4. Plug the cable into the USB port of the PC.
5. Press the Windows Start button at the bottom left corner of the
screen.
6. Type the IP address of the device into the search field.
• \\192.168.254.1\ for field controller
\\192.168.254.3\ for other instruments
•
7. Press Enter.
A file browser opens. You can now browse within the folders on the
instrument.

Power Functions

Press and hold power key (
The instrument must have a power supply.
☞
Press and hold power key (
☞ Instrument must be on.
Option Description
Turn off Turn TS instrument off.
Stand-by Put TS instrument into stand-by mode.
☞
Reset... Performs one of the following options:
Restart (restarts Windows EC7)
•
• Reset Windows EC7 (resets Windows EC7 and commu-
nication settings to factory defaults)
Reset installed software (resets settings of all instal-
•
led software)
Reset Windows EC7 and installed software (resets
•
Windows EC7 and settings of all installed software)
) for 2s.
) for 2 s to open Power Options menu.
In stand-by mode, the TS instrument shuts down
and reduces power consumption. Rebooting from
stand-by mode is quicker than a cold start after
turning off.
33