Leica tps1100 Reference Manual page 164

GeoCOM Reference Manual
TMC_ACCURACY_GUARANTEE
TMC_ANGLE_ERROR
TMC_BUSY
RC_ABORT
RC_SHUT_DOWN
See Also
TMC_DoMeasure
TMC_GetAngle5
TMC_GetSimpleMea
Example
RC_TYPE
TMC_ANGLE
BOOLE
short
nCnt=0;
do
{
bExit=TRUE;
// Gets the whole angle data
Result=TMC_GetAngle(Angle, TMC_AUTO_INC);
TPS1100 - Version 1.05
Theodolite Measurement and Calculation - TMC
TMC_IfDataIncCorrError
This message is to be considers as
warning.
Accuracy is not guaranteed, because the
result consisting of measuring data which
accuracy could not be verified by the
system. Angle data are available.
You can a forced incline measurement
perform or switch off the incline.
This message is to be considers as info.
Problems with angle res. incline sensor. A
valid angle could not be measured. Angle
data are not available.
At repeated occur call service.
TMC resource is locked respectively
TMC task is busy. Angle data are not
available.
Repeat measurement.
Measurement through customer aborted.
System power off through customer.
Result;
Angle;
bExit,
bAzeCorrError,
bIncCorrError;
nCnt;
16-16