Client Specific Geocom Functions - Leica tps1100 Reference Manual

GeoCOM Reference Manual
5.3

CLIENT SPECIFIC GEOCOM FUNCTIONS

The following functions are not applicable to the ASCII protocol, because these
functions influence the behaviour of the client application only.
5.3.1 COM_Init - Initialize GeoCOM
COM_Init ............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ -
C-Declaration
COM_Init ( void )
VB-Declaration
VB_COM_Init ()
ASCII-Request
-
ASCII-Response
-
Remarks
COM_Init
does not change the TPS' state.
Note: No other GeoCOM function can be called successfully without
having initialised GeoCOM before.
Parameters
-
Return Codes
RC_OK
See Also
COM_End
Example
See appendix C-2 for an example program frame.
5.3.2 COM_End - Quit GeoCOM
COM_En d ........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... -
C-Declaration
COM_End( void )
TPS1100 - Version 1.05
has to be called to initialise internal buffers and variables. It
On successful completion.
Communication Settings
5-8