Leica tps1100 Reference Manual page 189

GeoCOM Reference Manual
TMC_DoMeasure
measurement the EDM must be switch off (use
Command = TMC_CLEAR
Parameters
Face
Return Codes
RC_OK
TMC_SIGNAL_ERROR
RC_IVPARAM
RC_ABORT
RC_SHUT_DOWN
See Also
TMC_DoMeasure
Example
RC_TYPE Result;
TMC_SIGNAL Signal;
TMC_DoMeasure(TMC_SIGNAL);
do
{
Result=TMC_GetSignal(Signal);
if(Result==RC_OK)
{
}
}while(Result==RC_OK);
TPS1100 - Version 1.05
Theodolite Measurement and Calculation - TMC
where
Command = TMC_SIGNAL
).
out
Execution successful.
Error within signal measurement.
At repeated occur call service.
The signal measurement program is not
activated. No signal measurement possible.
Activate signal measurement.
Measurement through customer aborted.
System power off through customer.
.
.
.
TMC_DoMeasure
Face position.
. After the
where
16-41