Leica tps1100 Reference Manual page 152

GeoCOM Reference Manual
Inclination Sensor Measurement Program
(see Chapter 16.1.1 for further information)
enum TMC_INCLINE_PRG {
TMC_MEA_INC
TMC_AUTO_INC
TMC_PLANE_INC
};
TMC Measurement Mode
(see Chapter 16.1.2 for further information)
enum TMC_MEASURE_PRG {
TMC_STOP
TMC_DEF_DIST
TMC_TRK_DIST
TMC_CLEAR
TMC_SIGNAL
TMC_DO_MEASURE
TMC_RTRK_DIST
TMC_RED_TRK_DIST
TMC_FREQUENCY
};
EDM Measurement Mode
enum EDM_MODE {
EDM_MODE_NOT_USED
EDM_SINGLE_TAPE
EDM_SINGLE_STANDARD = 2, // Standard single measurement
EDM_SINGLE_FAST
EDM_SINGLE_LRANGE
EDM_SINGLE_SRANGE
EDM_CONT_STANDARD
EDM_CONT_DYNAMIC
EDM_CONT_REFLESS
EDM_CONT_FAST
EDM_AVERAGE_IR
EDM_AVERAGE_SR
EDM_AVERAGE_LR
};
TPS1100 - Version 1.05
Theodolite Measurement and Calculation - TMC
// Use sensor (apriori sigma)
= 0,
// Automatic mode (sensor/plane)
= 1,
// Use plane (apriori sigma)
= 2,
// Stop measurement program
= 0,
// Default DIST-measurement
= 1,
// program
// Distance-TRK measurement
= 2,
// program
// TMC_STOP and clear data
= 3,
// Signal measurement (test
= 4,
// function)
// (Re)start measurement task
= 6,
// Distance-TRK measurement
= 8,
// program
= 10, // Red laser tracking
// Frequency measurement (test)
= 11
= 0, // Init value
= 1, // Single measurement with tape
= 3, // Fast single measurement
= 4, // Long range single measurement
= 5, // Short range single measurement
= 6, // Standard repeated measurement
= 7, // Dynamic repeated measurement
= 8, // Reflectorless repeated measurement
= 9, // Fast repeated measurement
= 10,// Standard average measurement
= 11,// Short range average measurement
= 12 // Long range average measurent
16-4