Leica tps1100 Reference Manual page 27

GeoCOM Reference Manual
Sleep Either because of reaching the time out or by using the function
COM_SwitchOff(COM_TPS_SLEEP)
when starting from online mode. Only if the previous mode was
online mode it can be switched back to it with
COM_SwitchOnTPS(COM_TPS_REMOTE).
3.5.1 Getting Mode of Operation Concerning Communication
This is available only when the application uses the function call protocol. Hence
a DLL is used to automate RPC calls. That is why the current implementation
does not log the current state per default. Logging can be switched on by using
COM_EnableSignOff(TRUE)
mode will be logged and can be requested with
Note: The mode can be determined only if GeoCOM is active and the sign-off
message is activated. In any other situation,
the state
COM_TPS_UNKNOWN
TPS1100 - Version 1.05
Fundamentals of Programming GeoCOM
. After enabling state changes to and from online
.
this state has been reached
COM_GetTPSState
COM_GetTPSState
.
will yield
3-14