Leica tps1100 Reference Manual page 146

GeoCOM Reference Manual
15.2.2 SUP_SetConfig - Set power management configuration
SUP_SetConfig ................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... 14002
14002 ...............................................................................................................................................................................................................................................................SUP_SetConfig
C-Declaration
SUP_SetConfig(ON_OFF_TYPE LowTempOnOff,
VB-Declaration
VB_SUP_SetConfig(LowTempOnOff As Long,
ASCII-Request
%R1Q,14002:LowTempOnOff[long], AutoPower[long], Timeout[long]
ASCII-Response
%R1P,0,0:RC
Remarks
Set the configuration for the low temperature control (
power off automatic (
and the corresponding timeout for the auto power off automatic.
Parameters
LowTempOnOff
AutoPower
Timeout
Return-Codes
RC_OK
See Also
SUP_GetConfig
TPS1100 - Version 1.05
SUP_AUTO_POWER AutoPower,
SYSTIME Timeout)
AutoPower As Long,
Timeout As Long)
AUTO_POWER_DISABLED|..._SLEEP|..._OFF
in
Switch for the low temperature control.
Per default the device automatically turns
off when internal temperature fall short of
o
-24
in Defines the behaviour of the power off
automatic (default:
AUTO_POWER_SLEEP).
in
The timeout in ms. After this time the
device switches in the mode defined by the
value of
(press a key, turn the device or
communication via GeoCOM) occurs. The
default value for
15 Min.
Execution always successful.
C (
LowTempOnOff = On
AutoPower
AutoPower
Timeout
Supervisor - SUP
), the auto
ON|OFF
).
=
when no user activity
is 900000ms =
)
15-3