GeoCOM Reference Manual
Provided Samples
C P
S
ROVIDED
AMPLES
C-1
SETTINGS FOR TERMINAL EMULATOR
To see how ASCII protocol works take a closer look at the provided settings file
for the application Terminal.exe.
Use the terminal emulator Terminal.exe which has been provided by Microsoft
with Windows 3.1/3.11 and use
as the set up file for it. If you start
geocom.trm
Terminal.exe and open
the following window is displayed:
geocom.trm
Connect the TPS1100 instrument to the PC by using a standard GSI connection
cable. Start the emulator.
has been set up to the default parameters
Geocom.trm
of GeoCOM (19200 Baud, 8 bit, no parity, 1 stop bit). Be sure that the instrument
and the terminal emulator use the same settings and switch the instrument to
online mode. If not already enabled then enable the function key bar of the
application.
Then you can use the emulator to send requests by pressing the assigned buttons.
The replies will appear in the emulator's window.
TPS1100 - Version 1.05
C-1