Leica tps1100 Reference Manual page 28

GeoCOM Reference Manual
The following picture shows the dependencies graphically. Instead of the
correctly defined identifiers, shortcuts have been used.
SwitchOff(SHUT_DOWN)
SwitchOn(REMOTE)
On-
line
SwitchOff(SLEEP)
SwitchOn(ONLINE)
On-
line
RPC
[F]SetOnlineDlg
[F]SetRcsDlg
[E]MeasRecord
Picture 3-1 TPS1100 modes of operation in respect to communication
TPS1100 - Version 1.05
Local
Local()
[F]SetOnlineDlg
TimeOut/
KeyPress
TimeOut/
KeyPress
Sleep
if enabled:
sends SignOff message when leaving,
sends SignOn message on arrival
which can change a state
System function which shows a dialog for switching to online
mode. Can be started in "Communication mode" menu on the
default configuration.
System function which shows a dialog for switching to remote
control mode. Can be started with the RCS key in the "PROG"
menu on the default configuration.
System event which causes the starting of the measurement
dialog. Can be generated by pressing the MEAS key in the "Main"
menu on the default configuration.
Fundamentals of Programming GeoCOM
Off
ON/OFF-Key
ON/OFF-Key if
prev. set to RCS
[F]SetRcsDlg
[E]MeasRecord
RCS
TimeOut/ TimeOut/
KeyPres KeyPress
ON/OFF-Key if
AUTOEXEC = Meas
GSI/
Meas
power
states
off
active
sleep
3-15