Assign System Link Id - Samsung OfficeServ 7000 Series Programming Manual

[820] ASSIGN SYSTEM LINK ID

This MMC is used to assign the system link ID for PRI and VoIP networking. Up to 100
link IDs can be entered including SELF ID. In addition, each Link ID is associated with the
IP address.
Option
LINK ID
SIGNAL G/W
TIME SYNC
NODE NAME
NO MGI
CODEC
CONDITIONS
'SELF' represents self-node, and must be set to use the networking function. Items other
than 'SELF' are used for station numbers and can be omitted.
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 820.
Display shows:
2) Enter SELF link ID via dial keypad and press Right
Soft button.
3) Press Volume button to select other link ID and
press Right Soft button to mover cursor.
4) Enter other link ID via dial keypad and press Right
Soft button.
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
© SAMSUNG Electronics Co., Ltd.
System ID for networking feature.
System IP address for VoIP networking.
System Time and date can be updated by QSIG Call
System Node Name for VoIP networking
No: Use MGI as of old, Yes: Don't use MGI
(This option can be shown in case that MMC 861 'MPS SERVICE' set to
ENABLE)
Preferentially used CODEC for SPNET
OfficeServ 7000 Series Call Server Programming Manual
Description
DISPLAY
SELF:LINK ID
SELF:LINK ID
11
SYS01:LINK ID
SYS01:LINK ID
22
2-341