User Relay; Analog Inputs/Outputs; Digital Inputs; Digital Outputs - Parker 650G Product Manual

User Relay

Maximum Voltage
Maximum Current
Sample Interval

Analog Inputs/Outputs

Range
Impedance
Resolution
Dynamic Response

Digital Inputs

Operating Range
Input Current
Sample Interval

Digital Outputs

Nominal Open Circuit Output Voltage
Nominal Output Impedance
Rated Output Current
650G AC Drive
RL1A, RL1B. These are volt-free relay contacts. 50V dc max, 0.3A max (for inductive loads
up to L/R=40ms, a suitable freewheel diode must be used).
250Vac
4A
10ms
AIN1, AIN2, AOUT.
Inputs
0-10V and 0-5V (no sign) set via parameter
0-10V, 0-5V, 0-20mA or 4-20mA (no sign) set via
parameter S IP23 (AIN2)
Absolute maximum input current 25mA in current mode
Absolute maximum input voltage 24V dc in voltage mode
Voltage input 20k
Current Input <6V @ 20mA
10 bits (1 in 1024)
Sampled every 10ms
DIN1, DIN2, DIN3, DIN4, DIN5:
0-5V dc = OFF, 15-24V dc = ON
(absolute maximum input voltage ±30V dc)
IEC1131
DIN6, DIN7:
0-1.5V dc = OFF, 4-24V dc = ON
(absolute maximum input voltage ±30V dc)
IEC1131
7.5mA @ 24V
10ms
DOUT1 and DOUT2 (DOUT1 is only configurable using DSE or other suitable programming
tool ).
23V (minimum 19V)
33
Frames 1, 2, & 3 - 50mA : The total current available is 50mA,
either individually or as the sum of terminal 6 & 10.
Frames C, D, E & F - 150mA : The total current available is 150mA,
either individually or as the sum of terminal 6 & 10.
www.comoso.com
Technical Specifications
Output
S IP13 (AIN1) 0-10V (no sign)
Maximum rated output
current 10mA, with short
circuit protection
10 bits (1 in 1024)
Bandwidth 15Hz
24V
15V
5V
0V
24V
4V
1.5V
0V
9-15
ON
undefined state
OFF
ON
undefined state
OFF