User Information; Contact Information For Technical Assistance - Parker ACR7000 Series Programmer's Manual

USER INFORMATION

User Information
Warning:
Warning:
ACR7000 and IPA products and the information in this guide are the proprietary property of Parker Hannifin
Corporation or its licensers, and may not be copied, disclosed, or used for any purpose not expressly authorized
by the owner thereof.
Since Parker Hannifin constantly strives to improve all of its products, we reserve the right to change this guide,
and software and hardware mentioned therein, at any time without notice.
In no event will the provider of the equipment be liable for any incidental, consequential, or special damages of any
kind or nature whatsoever, including but not limited to lost profits arising from or in any way connected with the
use of the equipment or this guide.
© 2021 Parker Hannifin Corporation
All Rights Reserved

Contact Information for Technical Assistance

Contact your local automation technology center (ATC) or distributor.
North America and Asia
Parker Hannifin
Electronic Motion and Controls Division
5500 Business Park Drive
Rohnert Park, CA 94928
Telephone: (707) 584-7558
Fax: (707) 584-8029
Email: emn.service@support.parker.com
Internet: http://www.parkermotion.com
2 ACR Programmer's Guide
ACR7000 and IPA products are used to control electrical and
mechanical components of motion control systems. You should
test your motion system for safety under all potential
conditions. Failure to do so can result in damage to equipment
and/or serious injury to personnel.
Risk of damage and/or personal injury.
The ACR7000 and IPA described in this guide contain no user-
serviceable parts. Attempting to open the case of any unit, or to
replace any internal component, may result in damage to the
unit and/or personal injury. This may also void the warranty.