Earthing/Safety Details; Power Details; Cooling Fans - Parker 650G Product Manual

Frame 1, 2, 3 & c - f
Hide thumbs Also See for 650G:
Table of Contents

Advertisement

9-4
Technical Specifications

Earthing/Safety Details

Earthing
Input Supply Details
(TN) and (IT)
Prospective Short Circuit
Current (PSCC)
Earth Leakage Current

Power Details

1-Phase Supply
3-Phase Supply
Supply Power Factor (lag)
Switching Frequency
Output Frequency
Overload
Supply Short Circuit Rating

Cooling Fans

Drive Product Code
FRAME C
650G 7.5kW @ 400V
650G 11kW, and 15kw @ 400V
FRAME D
650G 15kW, 18.5kW & 22kW @ 400V
650GD 30kW @ 400V
FRAME E
All models
FRAME F
One single phase fan is provided, supplied from an auxiliary input. There are two voltage variants, either 115V ac or 220Vac. The fan
is powered from a single phase supply which uses a capacitor to generate the quadrature phase. Protect the fan using a 3A fuse.
110/120V : 130W, 10F, Stator - 16
220/240V : 140W, 2.5F, Stator - 62
All models
Permanent earthing is mandatory on all units.
Use a copper protective earth conductor 10mm² minimum cross-section, or install a second
conductor in parallel with the protective conductor to a separate protective earth terminal
The conductor itself must meet local requirements for a protective earth conductor
Drives without filters are suitable for earth (TN) or non-earth referenced (IT) supplies.
The drive is only suitable for earth referenced supplies (TN) when fitted with an internal filter.
External filters are available for use on TN and IT (non-earth referenced) supplies.
Refer to the appropriate Electrical Ratings table.
>10mA (all models)
220-240V ac ±10%,50/60Hz ±10%, ground referenced (TN) or
non-ground referenced (IT)
220-240V ac or 380-460V ac ±10%,50/60Hz ±10%, ground referenced (TN) or non-
ground referenced (IT)
0.9 (@ 50/60Hz)
Nominal 4kHz
0 – 240Hz
150% for 30 seconds
220-240V 1 product -5000A, 220-240V ac 3 product - 7500A
380-460V 3 product -10000A
The forced-vent cooling of the drive is achieved by 1, or in some cases 2 fans. The Fan
Rating gives the volume of air venting from the drive. All except the Frame F fans are
internally-supplied 24V fans.
Drive Catalog Code
650G-432160...
650G-432230...
650G-432310.. 650G-432380... 650G-432450
650G-432590..
All models
All models
www.comoso.com
Fan Ratings
25cfm (42.5 m³/hr)
35cfm (59.5 m³/hr)
55cfm (93.4 m³/hr)
81cfm (138 m³/hr)
160cfm (272 m³/hr)
270cfm (459 m³/hr)
650G AC Drive

Advertisement

Table of Contents
loading

Table of Contents