Chapter 6 Programming Your Application; Mmi Parameters - Parker 650G Product Manual

6-1
Programming Your Application
P
Chapter 6
You can program the drive to your specific application. This programming simply involves
changing parameter values. For instance, parameter
be used as starting points for application-specific programming.
Each Application internally re-wires the drive for a different use when it is loaded. The default
for the parameter is "1". Changing this parameter's setting to "2" will load Application 2. Refer
to Chapter 13: "Applications" for further information.
If necessary, there are three parameters for tuning your drive. Refer to PID - Tuning Your Drive,
page 6-13.
Saving Your Modifications
When parameter values are modified or an Application is loaded, the new settings are saved
automatically. The drive will retain the new settings during power-down.

MMI Parameters

This table provides information about each parameter accessible using the keypad, or MMI
(Man Machine Interface). For more information about these and additional parameters
accessible using DSE (or other suitable programming tool), refer to the 650G Software Product
Manual on our website: www.parker.com/ssd
Key to MMI Parameters Table
Note: The "Range" for a parameter value is given in the Configurable Parameters Table.
Ranges for outputs are given as "—.xx %", for example, indicating an indeterminate
integer for the value, to two decimal places.
ROGRAMMING
Parameters indicated with
F
DETAILED MENUS parameter (
M
Parameters indicated with
Application using parameter
VF
Parameters indicated with
motor control mode, as selected by parameter
SV
Parameters indicated with
Vector) motor control mode, as selected by parameter
www.comoso.com
Y A
OUR PPLICATION
P
1 selects various Applications which can
F
are visible with full menus only. Refer to the
ST
99).
M
are Motor Parameters. They are not reset by changing
P
1; all other parameters are reset to default values.
VF
are only visible when the drive is in VF (Volts/Hz)
S
CL01.
SV
are only visible when the drive is in SV (Sensorless
S
CL01.
650G AC Drive