Password Protection; Quick Application Selection; Selecting The Menu Detail - Parker 650G Product Manual

Local to Remote Control:
For safety reasons, the drive will not return to Remote Control if this will cause the drive
Note:
to start. Check RUN and JOG inputs are low.

Password Protection

When activated, an odd-numbered password prevents unauthorised parameter modification by
making all parameters read-only. The local setpoint is not made read-only if an even-numbered
password is used. Password protection is set-up using the
ACTIVATE
Steps
Actions
Go to
1
Press
Enter new
password using
2
Press
repeatedly until
3
top of menu is
reached
Press to
4
activate
password
Default = 0000, de-activated
Any other value is a password

Quick Application Selection

You can navigate immediately to the
APPLICATION parameter,
shown opposite.
Then, press the
Application. Press again to allow the parameter to be changed.
Use the
Press the
Refer to Chapter 13: "Applications" for further information.

Selecting the Menu Detail

For ease of operation the drive can display full or reduced menus. Refer to Chapter 6 to see how
the setting changes the displayed menu. Additional parameters are indicated with
Navigate to the
or partial menu detail. The default setting of 0 provides partial menu detail. Set the parameter to
1 for full menu detail.
View the Local Setpoint
Hold this key down until
is removed from the display
Release the key to display
TEMPORARY DE-ACTIVATION
Display Actions
Try to edit any
parameter with
password activated
Enter current
password using
for example
, Remote
Setpoint or
Press
Local Setpoint
, Remote A drive will power-up with the last
password status. Temporary de-
Setpoint or
activation is lost on power-down.
Local Setpoint
P
1, from power-up, as
key to display the current
keys to select the appropriate Application by number.
key to load the Application.
parameter (SET::SETP::ST99) and press the
www.comoso.com
The Keypad
LOCAL
REMOTE
parameter
REMOVE PASSWORD
Display Actions
Go to

Press
Enter current
password using
for example
Original
Press
parameter
displayed,
Reset to 0000
password
using
de-activated
Press
remove
password
Hold down the key opposite:
Power-up the drive, continue
to hold for at least 1 second
key. This toggles full
5-5
Display

for example
to
HOLD
F
in the table.
650G AC Drive