IMPORTANT USER INFORMATION
User Information
Warning:
ACR7000 products and the information in this guide are the proprietary property of Parker Hannifin Corporation
or its licensers, and may not be copied, disclosed, or used for any purpose not expressly authorized by the owner
thereof.
Since Parker Hannifin constantly strives to improve all its products, we reserve the right to change this guide, and
software and hardware mentioned therein, at any time without notice.
In no event will the provider of the equipment be liable for any incidental, consequential, or special damages of any
kind or nature whatsoever, including but not limited to lost profits arising from or in any way connected with the
use of the equipment or this guide.
© 2020 Parker Hannifin Corporation
All Rights Reserved
Contact Information for Technical Assistance
Contact your local automation technology center (ATC) or distributor.
North America and Asia
Parker Hannifin
Electromechanical & Drives Division North America
5500 Business Park Drive
Rohnert Park, CA 94928
Telephone: (707) 584-7558
Fax: (707) 584-8029
Email:
emn_support@parker.com
Internet:
http://www.parkermotion.com
2 ACR7000 Controller Installation Guide
ACR7000 products are used to control electrical and mechanical
components of motion control systems. You should test your
motion system for safety under all potential conditions. Failure
to do so can result in damage to equipment and/or serious injury
to personnel.
Europe
Parker Hannifin
Electromechanical Automation Europe
Robert-Bosch-Strasse 22
77656 Offenburg (Germany)
Telephone: +49 (0781) 509-0
Fax: +49 (0781) 509-98176
Email:
em-motion@parker.com
Internet:
www.parker.com/eme