Fitting The Remote 6511 Keypad - Parker 650G Product Manual

Fitting the Remote 6511 Keypad

Two types of 650G keypads are available:
Parker SSD Part No. 6511/DISP/... not suitable for remote-mounting
Parker SSD Part No. 6511/DISPR/. suitable for remote-mounting on drives with an RS232 port
You can remote-mount the keypad using:


A standard P3 lead, Parker SSD Part Number
CM057375U300, is used to connect the keypad
to the drive.
Two self-tapping screws are provided with the
keypad. Remove the protective film from the
gasket. An enclosure rating of IP54 is achieved
for the remote keypad when correctly mounted.
Assembly Procedure
1
Cut-out Dimensions
The drawing below can be photocopied actual size (100%) and used as a template if printed on
A5 paper.

5.5 mm
0.5
650G AC Drive
a Remote Keypad (identified by the RS232
connector on the back
the RS232 (P3) port located under the
terminal cover
1 2
72mm

mm
58
0.5
Template
25
Cut-out

2
32
mm
0
www.comoso.com
Installing the Drive
3

mm
0.5

1
15.5
0
mm
3-22
P3
4
P3
7mm

0.5
3.5
mm
0
54mm
26mm