Parker 650G Product Manual page 45

LED Indications
The module has three LEDs providing diagnostic
information about the 650G host drive's 'Health',
'Receive' and 'Transmit' activity.
HEALTH = Green, Rx = Red, Tx =Red
Configure the Drive
Before the module can be used you must configure the drive to your system. Set-up the
parameters in the SERIAL menu as appropriate. Refer to Chapter 6: "Programming Your
Application" - SET::SERL Menu, parameters
For Tag number information refer to the 650G Software Product Manual, available on the Parker
SSD Drives website:
Note: This Option can only be used on drives using software version 4.1 or higher.
650G AC Drive
LED Name LED Duty
HEALTH SHORT FLASH
EQUAL FLASH
ON
LONG FLASH
OFF
INTERMITTENT
Rx
INTERMITTENT
Tx
www.parker.com/ssd
www.comoso.com
Installing the Drive
Drive State
Re-configuration, or corrupted non-volatile
memory at power-up
Tripped
Healthy
Braking
No drive power, or serious hardware fault
Indicates activity on the 'receive' line carrying
data from the Master
Indicates activity on the 'transmit' line carrying
data to the Master
S S
SE01 to SE08.
.
3-24