Certificates - Parker 650G Product Manual

10-13
Certification for the Drive

Certificates

Issued for
compliance
In accordance with the EEC Directive
with the EMC
Directive when
the unit is used
We Parker SSD Drives, address as below,
as relevant declare under our sole responsibility that the
above Electronic Products when installed and
apparatus.
operated with reference to the instructions in
the Product Manual (provided with each piece
of equipment) is in accordance with the relevant
clauses from the following standard:-
This is
provided to
We Parker SSD Drives, address as below,
aid your
declare under our sole responsibility that the
justification
above Electronic Products when installed and
operated with reference to the instructions in
for EMC
the Product Manual (provided with each piece
compliance
of equipment) is in accordance with the
when the unit
relevant clauses from the following standard:-
is used as a
component.
* Compliant with the immunity requirements of the Standard without specified EMC filters.
Parker Hannifin Ltd., Automation Group, SSD Drives Europe
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: +44(0)1903 737000
Registered Number: 4806503 England. Registered Office: 55 Maylands Avenue, Hemel Hempstead, Herts HP2 4SJ
EC D
ECLARATIONS OF
Date CE marked first applied: 01.04.2000
EMC Directive
2004/108/EC
* BSEN61800-3 (2004)
M
ANUFACTURERS
EMC Declaration
* BSEN61800-3 (2004)
Dr Martin Payn (
www.comoso.com
650G
C
ONFORMITY
Low Voltage Directive
In accordance with the EEC Directive
2006/95/EC
We Parker SSD Drives, address as below,
declare under our sole responsibility that the
above Electronic Products when installed and
operated with reference to the instructions in
the Product Manual
(provided with each piece of equipment), is in
accordance with the relevant clauses from the
following standard :-
EN61800-5 (2007)
D
ECLARATIONS
Machinery Directive
The above Electronic Products
are components to be incorporated into
machinery and may not be operated alone.
The complete machinery or installation using
this equipment may only be put into service
when the safety considerations of the Directive
2006/42/EC are fully adhered to.
Particular reference should be made to
EN60204-1 (Safety of Machinery - Electrical
Equipment of Machines).
All instructions, warnings and safety
information of the Product Manual must be
adhered to.
Conformance Officer)
FAX: +44(0)1903 737100
The drive is CE
marked in
accordance with
the low voltage
directive for
electrical
equipment and
appliances in the
voltage range
when installed
correctly.
Since the
potential hazards
are mainly
electrical rather
than mechanical,
the drive does not
fall under the
machinery
directive.
However, we do
supply a
manufacturer's
declaration for
when the drive is
used (as a
component) in
machinery.
650G AC Drive