External Ac Supply Emc Filter - Parker 650G Product Manual

3-27
Installing the Drive

External AC Supply EMC Filter

Mount the filter as close as possible to the drive.
Note: Follow the cabling requirements given in Chapter 9 "Technical Specifications"
Refer to Chapter 10: "External AC Supply (RFI) Filters" for further information.
Footprint/Bookcase Mounting Filters for (Frame C, D, E & F)
These filters can be both footprint and bookcase mounted. They are suitable for wall or cubicle
mount, but the filter must be fitted with the appropriate gland box when wall mounted.
The filters for Frames C, D and E look similar. The Frame D filter drawing is given in the
following pages. Size variations for the frames are given in the table below.
The Frame F drawing and sizes are also supplied.
Filter Filter Part Number
Description
Frame C
500V IT/TN CO467842U044
Frame D
500V IT/TN CO467842U084
Frame E
500V IT/TN CO467842U105
Frame F
500V IT/TN CO467842U215
External filters are available for use with TN and IT supplies. Please check for
suitability in Chapter 9: "Technical Specifications" - External AC Supply (RFI) Filters.
Do not touch filter terminals or cabling for at least 3 minutes
Only use the ac supply filter with a permanent earth connection.
Terminal Earth
Block Terminal
10mm 2 5mm
2
25mm 6mm
50mm 2 8mm
95mm 2 8mm
www.comoso.com
WARNING!
after removing the ac supply.
Gland Dimensions
Mounting
4 x 4mm 400 x 178x 55mm
4 x 4mm 513 x 233 x 70mm
4 x 4mm 698 x 250 x 80mm
not 825 x 250 x
applicable 115mm
Fixing Weight
Centres
384 x 2.1kg
150mm
Gland Plate : BA467840U044
495 x 4.2kg
208mm
Gland Plate : BA467840U084
680 x 6.2kg
216mm
Gland Plate : BA467840U105
795 x
216mm
Gland Plate : Not applicable
650G AC Drive