Basler BE1-11g Instruction Manual page 664

652
Firmware
Version and Date
1.01.00, Apr-09
1.02.00, Aug-09
1.03.00, Nov-09
1.03.01, May-10
2.04.00, Aug-10
2.04.01, Mar-11
2.04.02, Jun-11
2.05.00, Oct-11
2.05.01, Jun-12
2.06.00, Sep-12
2.06.01, Nov-12
2.06.02, Dec-12
2.06.03, Mar-13
2.06.04, Mar-13
Revision History
Table 261. Application Firmware Revision History
•
Initial release
•
Made internal improvements invisible to the user
•
Improved COMTRADE report
•
Improved calculation of power values
•
Improved access timeout length
•
Improved sequence of events downloading/viewing
•
Improved communications to prevent lockups
•
Improved RAM write access during BE1-11g startup
•
Improved operation of hold attribute on contact outputs
•
Improved three-wire power metering
•
Improved low-voltage metering
•
Improved 81R (rate of change of frequency) function
•
Improved resolution of values on COMTRADE report
•
Implemented IEC 61850 protocol option
•
Under Settings Explorer, moved Display Units from System
Parameters to General Settings
•
Implemented Secure Access Login for Modbus
•
Implemented Alarm Resetting function for Modbus
•
Improved IEC 61850 communications
•
Added Output Override Alarms
•
Enhanced voltage settings resolution for 27, 59, and 81
elements
•
Improved target reporting
•
Corrected issue where bad data in log file could prevent correct
power-up of relay
•
Added support for RTD module (49RTD protection and analog
input protection elements)
•
Added 78V Vector Jump protection, 21 Distance protection, 25A
Synchronizer, 87 Phase Differential protection, 87 Neutral
Differential protection, and 78OOS Out of Step protection
•
Added unbalance current protection mode for the 50 and 51
elements
•
Added support for enhanced front panel in J type case
•
Added security logging
•
Added Delta/Wye Compensation Enable setting for the Distance
(21) element
•
Improved 87N operation
•
Improved logic timers
•
Improved SEF pickups
•
Improved output override operation through the front panel
•
Improved 51, 25, and 25A element operation
•
Improved port access timers
•
Improved angle compensation in differential report
•
Added DNP data
•
Improved 21 element operation
•
Improved distance to fault measurement
9424200994 Rev N
Change
BE1-11g