Basler BE1-11g Instruction Manual page 579

9424200994 Rev N
Standards
IEC Standards
IEC 60068-1: Environmental Testing Part 1: General and Guidance. Temperature Test
IEC 60068-2-1: Basic Environmental Testing Procedures, Part 2: Tests - Test Ad: Cold (Type Test)
IEC 60068-2-2: Basic Environmental Testing Procedures, Part 2: Tests - Test Bd: Dry Heat (Type Test)
IEC 60068-2-28: Environmental Testing Part 2: Testing-Guidance for Damp Heat Tests
IEC 60068-2-38: Composite Temperature/Humidity Cyclic Test
IEC 60255-4: Single Input Energizing Quantity Measuring Relays with Dependent Specified Time
IEC 60255-5: Electrical Insulation Tests for Electrical Relays. Dielectric Test and Impulse Test
IEC 60255-6: Electrical Relays - Measuring Relays and Protection Equipment
IEC 60255-21-1: Vibration, Shock, Bump, and Seismic Tests on Measuring Relays and Protective
Equipment (Section 1 - Vibration Test - Sinusoidal). Class 1
IEC 60255-21-2: Vibration, Shock, Bump, and Seismic Tests on Measuring Relays and Protective
Equipment (Section 2 - Shock and Bump Test - Sinusoidal). Class 1
IEEE Standards
IEEE Std C37.90.1-2002 - IEEE Standard Surge Withstand Capability (SWC) Tests for Relays and Relay
Systems Associated with Electric Power Apparatus
IEEE Std C37.90.2-2004 - IEEE Standard Withstand Capability of Relay Systems to Radiated
Electromagnetic Interference from Transceivers
IEEE Std C37.90.3-2001 - IEEE Standard Electrostatic Discharge Test for Protective Relays
CE Compliance
This product has been evaluated and complies with the relevant essential requirements set forth by the
EU legislation.
EC Directives:
•
LVD 2006/95/EC
•
EMC 2004/108/EC
Harmonized standards used for evaluation:
•
EN 50178 – Electronic Equipment for use in Power Installations
•
EN 61000-6-2 – Electromagnetic Compatibility (EMC), Generic Standards, Immunity for Industrial
Environments
•
EN 61000-6-4 – Electromagnetic Compatibility (EMC), Generic Standards, Emission Standard for
Industrial Environments
UL Recognition
This product is recognized to applicable U.S. and Canadian safety standards and requirements by UL.
Standard used for evaluation:
•
UL 508
UL Recognition for Style xxxxxxJxxxxCxx
This product is recognized to applicable U.S. and Canadian safety standards and requirements by UL.
Evaluation to Class 1, Div 2, Groups A, B, C, and D, Temperature Code T4 for Hazardous Location
Service. Suitable for use in Class 1, Division 2, Groups A, B, C, and D hazardous locations only.
BE1-11g
567
Specifications