Digital Operator Display - YASKAWA E7 Drive User Manual

Digital Operator
The Digital Operator is used for programming, operating, and monitoring drive operation. The E7 Drive will not run unless the
digital operator is securely attached to the Drive.

Digital Operator Display

The various items included on the Digital Operator are described below.
Menu Display
See Table 3.7
-DRIVE-
Frequency Ref
U1-01= 60.00Hz
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
U1-02= 60.00Hz
U1-03= 10.05A
Fig 3.1 Digital Operator Component Names and Functions
Digital Operator 3 - 2
Drive Mode Indicators
Rdy
Drive can operate when a drive command is input
Displays monitor data, parameter numbers and settings
RUN & STOP Indicators
See Tables 3.5 and 3.6
See Table 3.2
Ready Display
Data Display
1 line x 13 characters
3 lines x 16 characters
Key Descriptions
See Table 3.1