Chapter 3: Connecting Devices; Step 1: Connecting Data And Voice Devices; Connecting A Switch Or A Network Data Port - Avaya G450 Installing And Upgrading

Chapter 3: Connecting devices

External endpoint devices can be connected to the ports on the front panels of the installed
media modules and to the fixed front panel ports. Before you connect endpoint devices, the
G450 should be mounted and all media modules should be inserted.
!
WARNING:
To reduce the risk of fire, use only 26 AWG or larger telecommunication line cords
WARNING:
when installing telephones or adjuncts, or connecting to any media module
telecommunication ports.
!
WARNING:
Attention: Pour réduire les risques d'incendie, utiliser uniquement des conductors
WARNING:
de télécommmunications 26 AWG ou de section supérieure. Pour réduire les
risques d'incendie, veuillez n'utiliser que des fils de lignes télécommmunications
de 26 AWG ou de section supérieure, lorsque vous connectez des téléphones,
des équipements complémentaires, ou pour toute connexion aux ports
télécommunications d'une quelconque carte d'équipement.

Step 1: Connecting data and voice devices

There are various possible ways of connecting different devices. See your planning
documentation for any topology requirements to connect specific devices to specific ports. As
you connect devices, keep a record of the slots and ports into which specific devices are
connected. You will need this information when configuring the G450.

Connecting a switch or a network data port

The G450 can provide network switching and also supports the connection of switches. You can
connect the following to either of the ETH LAN ports on the G450 front panel:
One or more LAN switches
●
The network data ports in the office
●
Issue 2 June 2008 47