Administering The Gateway; Administering An Iolan+ Port - Avaya G450 Installing And Upgrading

Administering the gateway

You need to administer the gateway only if the S8300 Server and IOLAN+ are not in the same
subnet.
Note:
If the S8300 Server and IOLAN+ are in the same subnet, skip this procedure.
Note:
1. Select Admin mode > Password and press ENTER.
2. Type iolan and press ENTER.
3. Select gateway to access the Gateway menu.
4. Fill in the following fields for Entry 1:
Destination: S8300 Server IP address
●
Gateway: Gateway address
●
Netmask: Subnet mask
●
Note:
The following steps re-initialize the IOLAN+ so it knows it's connected to the LAN
Note:
through your gateway.
5. Select reboot and press ENTER.
6. Press the space bar to restart the IOLAN+.

Administering an IOLAN+ port

Use this procedure when connecting an adjunct or serial COM port on a PC directly (locally) to
the IOLAN+ (see
1. Select Admin mode > Password and press ENTER.
2. Type iolan and press ENTER.
3. Select port and press ENTER.
Figure 147: Connecting an adjunct to the IOLAN+
Terminal server installation
on page 248).
Issue 2 June 2008 253