!
WARNING:
Verify that temperature and clearance ranges are within tolerable limits. The
WARNING:
thermal sensors may shut down equipment if it is subjected to conditions beyond
the recommended limits. Equipment can be damaged if these restrictions are not
respected.
Power verification
Check that an adequate number of power outlets are available. Verify that the G450 Media
Gateway and the other equipment in the rack do not present a possible overcurrent or overload
to the customer's branch circuit and/or power distribution strip. Power requirements are listed in
Power cord specifications
!
WARNING:
Do not overload the power circuit.
WARNING:
Grounding verification
Ensure that the installation site has access to approved grounds and that either a trained
technician or a licensed electrician will be verifying all grounds and installing the Supplementary
Ground Conductor (consult
on page 150.
Step 4: Attaching ground
conductors).
Issue 2 June 2008
Site requirements
25