Avaya G450 Installing And Upgrading page 23

2. From the User menu, select Administer an S8xxx, G450, CCS, CVLAN, or ASG
Guard II.
The Enter Network Password dialog box appears.
3. Enter your ART user name and password.
4. Click OK.
The Start of Installation script & IP Addr Admin screen appears.
5. In the FL Number field, enter the customer's FL number.
6. In the Session Type field, select Installation Script Administration.
7. In the Product Type field, select G450 MEDIA GATEWAY if you want to configure remote
access for the G450, or S8300 SERVER if you want to configure remote access for the
S8300.
8. In the INADS field, enter the number of the telephone line to which you will connect the
modem.
9. Click Start Installation script & IP Addr Admin. ART validates your input and the
Customer Validation screen appears.
10. Read the customer information displayed, to check that it is correct.
11. In the Customer Type field, select Other.
12. Click Continue Installation Script Administration. A product list appears.
13. Click the number of the product for which you are configuring remote access. The G450
MEDIA GATEWAY Installation Script Administration Data screen appears.
14. In the Product Name field, enter the product name.
15. In the INADS Number field, make sure the correct customer provided dial-in number for
the G450 Media Gateway appears.
16. Click Continue Installation Script Administration. ART generates the RAS IP address
and password (CHAP secret key) and generates an installation script for the product. Keep
the RAS IP address and password to configure your modem later.
17. Click Download Installation Script File to download the installation script to your laptop,
or Email Installation Script File to have the script emailed to you.
A script file is created and downloaded or emailed to you.
Before going to site
Issue 2 June 2008 23