Connecting A Non-Fcc-Registered Music-On-Hold Source To A G450; Using A Ks-23395-L3 Coupler - Avaya G450 Installing And Upgrading

Power supplies and adjunct systems

Connecting a non-FCC-registered music-on-hold source to a G450

using a KS-23395-L3 coupler

Figure 154: Non-FCC-registered music-on-hold equipment connecting to KS-23395-L3 for
a G450 Media Gateway
Figure notes:
1. G450 Media Gateway
2. MM711 Analog Media Module
3. RJ-45 connection
1. Connect one end of an RJ-45 cable to a port in the MM711 Media Module, or to a port or
trunk port in the MM714 Media Module.
2. Connect the other end of the RJ-45 cable to a KS-23395-L3 coupler.
3. Connect the KS-23395-L3 coupler to the customer-supplied music source.
Follow the manufacturer's instructions to properly connect the music source to the
KS-23395-L3 coupler. Normally, you simply use an RCA cord.
4. Administer the switch for the new equipment.
282 Installation and Upgrades for the Avaya G450 Media Gateway
USB
MDM
CONSOLE SERVICES ETR CCA ETH WAN ETH LAN
ALM COMPACT FLASH
CPU
PWR
1 2 3 4 5 6
1 2 CARD IN USE
V10
V1 V5
V2 V6
V3 V7
V4 V8
G450
RST ASB
4. KS-23395-L3 coupler
5. RCA cord
6. Music source