Installing An Fcc-Registered Music Source On A G450 Media Gateway; Connecting An Fcc-Registered Music-On-Hold Source To A G450 Using A Ks-23395-L4 Coupler - Avaya G450 Installing And Upgrading

Power supplies and adjunct systems
Installing an FCC-registered music source on a G450 Media
Gateway
Figure 156 show the connections for the music-on-hold feature on a G450 Media Gateway for
an FCC-registered source.
Note:
If you want multiple music sources, you must use multiple ports on the MM711
Note:
Analog Media Module.
Connecting an FCC-registered music-on-hold source to a G450 using
a KS-23395-L4 coupler
Figure 156: FCC-registered music-on-hold equipment connecting to KS-23395-L4 for a
G450 Media Gateway
Figure notes:
1. G450 Media Gateway
2. MM711 Analog Media Module
3. RJ-45 connection
1. Connect one end of an RJ-45 cable to a port in the MM711 Analog Media Module.
2. Connect the KS-23395-L4 coupler to the customer-supplied music source.
Normally, you simply use a 8-pair modular cord.
3. Administer the switch for the new equipment.
284 Installation and Upgrades for the Avaya G450 Media Gateway
USB
MDM ETH WAN
CONSOLE SERVICES ETR CCA ETH LAN
ALM COMPACT FLASH
CPU
PWR
1 2 3 4 5 6
1 2 CARD IN USE
V10
V1 V5
V2 V6
V3 V7
V4 V8
G450
RST ASB
4. KS-23395-L4 coupler
5. 8-pair modular cord
6. Music source