Modem Configuration - Avaya G450 Installing And Upgrading

11. If you want to upload configuration and firmware files for IP phones to the G450 TFTP
Server, do the following:
a. In the Server IP Address field, enter the IP address of the machine hosting the files
that are to be uploaded.
b. Select the file transfer protocol (TFTP, FTP, or SCP) you want to use to upload the files
from the host machine. TFTP is selected by default.
c. The use of the SCP protocol is limited to copying files of 1 MB or less. Therefore, an
SCP server can be used for copying the script files, which do not exceed 128 KB, but
cannot be used for copying image files.
d. If you selected FTP or SCP, enter the username and password in the Username and
Password fields, and re-enter the password for confirmation in the Re-enter Password
field.
12. In the Select column, check any files you wish to upload. If you selected SCP as your
upload protocol, the checkboxes for the phone images are disabled. If a green circled
checkmark is displayed in the Uploaded column, the file has already been uploaded.

Modem configuration

1. To configure the G450 for modem use, click Continue on the TFTP Server screen.
The G450 Modem Type Selection screen appears. Select the modem type you want to
use. For more information on using a modem with the G450, see
and enabling a modem for remote access on page 63.
Firmware configuration
Chapter 4: Connecting
Issue 2 June 2008 183