Gateway Configuration - Avaya G450 Installing And Upgrading

Gateway configuration

1. Click Continue from the Security Files screen. The IP Addresses screen appears.
This screen displays the G450's ID, as well as the type of media module residing in each
slot of the G450's chassis.
Figure 79: The IP Addresses screen
2. Click the wrench icon corresponding to the G450 in the Action column.
The PMI configuration screen appears. The IP address and subnet mask of the PMI
should appear in this screen. Change this IP address and subnet mask in accordance with
your system specifications.
The Primary Management Interface (PMI) address is the interface used for the following
management functions:
- Registration of the G450 to an MGC
- Sending SNMP traps
- Opening telnet sessions from the G450
- Sending messages from the G450 using FTP and TFTP protocol
Note:
You can assign any IP interface that the MGC recognizes to be the PMI.
Note:
Gateway configuration
Issue 2 June 2008 173