Chapter 3: Connecting devices
External endpoint devices can be connected to the ports on the front panels of the installed
media modules and to the fixed front panel ports. Before you connect endpoint devices, the
G450 should be mounted and all media modules should be inserted.
!
WARNING:
To reduce the risk of fire, use only 26 AWG or larger telecommunication line cords
WARNING:
when installing telephones or adjuncts, or connecting to any media module
telecommunication ports.
!
ATTENTION:
Pour réduire les risques d'incendie, utiliser uniquement des conductors de
ATTENTION:
télécommmunications 26 AWG ou de section supérieure. Pour réduire les risques
d'incendie, veuillez n'utiliser que des fils de lignes télécommmunications de 26
AWG ou de section supérieure, lorsque vous connectez des téléphones, des
équipements complémentaires, ou pour toute connexion aux ports
télécommunications d'une quelconque carte d'équipement.
Step 1: Connecting data and voice devices
There are various possible ways of connecting different devices. See your planning
documentation for any topology requirements to connect specific devices to specific ports. As
you connect devices, keep a record of the slots and ports into which specific devices are
connected. You will need this information when configuring the G450.
Connecting a switch or a network data port
You can connect one or more LAN switches to either of the ETH LAN ports on the front panel.
Connecting a computer to the Services port
A laptop connected directly to the Services port of the G450 requires a specific configuration of
its network settings.
Issue 5 November 2009
43