Avaya G450 Installing And Upgrading page 228

Running the Gateway Installation Wizard (GIW)
Figure 140: G450 USB Modem Configuration screen
50. In the PPP IP Address field, enter the RAS IP address of the modem obtained using the
ART tool. See
page 22.
51. Enter the PPP Subnet Mask.
52. Select the authentication method:
If you have an Avaya Service contract, check Enable ASG Authentication to enable
●
remote access to the device.
If you do not have an Avaya Service contract:
●
- Check Enable CHAP Authentication.
- In the CHAP Secret field, enter the CHAP secret key obtained using the ART tool.
- In the Confirm CHAP Secret field, re-enter the CHAP secret key.
53. Click Continue. The Change Root Password screen appears.
228 Installation and Upgrades for the Avaya G450 Media Gateway
Running the Automatic Registration Tool (ART) for the RAS IP address
See Running the Automatic Registration Tool (ART) for the RAS IP address
page 22.
on
on