Administering The Iolan - Avaya G450 Installing And Upgrading

Power supplies and adjunct systems
Figure 147: Connecting an adjunct to the IOLAN+
Figure notes:
1. IP connection on an S8300/G450
2. Local area network (LAN)
3. IOLAN+ 104 terminal server
4. Adjunct (system management terminal or
a system printer, for example)
Follow these typical steps:
Note:
Depending on the adjunct's connections, you may not need all of these pieces.
Note:
1. Connect the null modem adapter to COM1 port on the adjunct.
Note:
The null modem is an important element in this setup. Without it, data may not
Note:
transfer correctly.
2. Connect the other end of the null modem adapter to the DB25 to RJ-45 cable.
3. Connect the RJ-45 end to any port on the IOLAN+.

Administering the IOLAN+

To administer the IOLAN+ the first time, you must connect a PC or laptop to the RS-232 Port 1
on the IOLAN+ terminal server. Follow these typical steps:
1. Connecting the IOLAN+
2. Setting up HyperTerminal on the computer
3. Administering the IOLAN+ the first time
248 Installation and Upgrades for the Avaya G450 Media Gateway
8
2 5
7
1
DATA CONNECTIONS ONLY - NOT FOR TELECOM USE
1 2 3 4
on page 249
on page 249
on page 249
6
5
4
7
3
10BASE-T 5VDC
5. Null modem
6. PC or laptop (for initial
administration)
7. DB25-to-RJ45 cable
8. DB25-to-DB9 cable