S8300 Server Ports; S8300 Server Port Leds - Avaya G450 Installing And Upgrading

Figure 44: The S8300 Server

S8300 Server ports

The S8300's 10/100BaseT Fast Ethernet port is labeled SERVICES, and is located in the center
of the front panel. The S8300's two USB ports are labeled USB 1 and USB 2. They are located
towards the right of the front panel.

S8300 Server port LEDs

Table 11: S8300 LEDs
LED
ALM
TST
ACT
In addition, the front panel of the S8300 has a LED labeled OK TO REMOVE, which is
connected to a button labeled SHUT DOWN. This LED indicates that the S8300 has been shut
down, and can be removed from the G450 chassis. Do not attempt to remove the S8300 without
instructions from a specially trained technician.
Name Color
Alarm Red
Test Green
Activity Yellow
The front panel of the Avaya S8300 Server
Indication
An alarm is present
Avaya Communication Manager is running.
When an S8300B is installed as an LSP, the
green light shows that the server is up and
waiting to provide service.
This LED is lit whenever a G450, a G700, an IP
telephone, or an IP console is registered with
the S8300. It is off when none of these IP
endpoints are registered with the S8300.
Issue 2 June 2008 135