Connecting a USB modem
1. Connect a USB modem to a working telephone line.
Note:
The MultiTech model MT5634ZBA-USB USB modem is the only USB modem
Note:
supported by the G450.
2. Connect one end of a USB cable to the modem.
3. Connect the other end of the USB cable to a USB port on the G450 front panel.
Test the modem connection
If the modem is successfully initialized, the MDM LED on the G450 front panel lights.
Testing the modem
If you connected a modem, verify that the MDM LED is lit, and then dial into the modem to
check that you can authenticate to the modem.
Test the modem connection
Issue 2 June 2008
231