Avaya G450 Installing And Upgrading page 38

Installing the Avaya G450 Media Gateway
Figure 7: Inserting the S8300 Server module.
5. Apply firm pressure to engage the connectors.
The connector has different length pins. The long pins will engage first to provide
grounding. Medium length and short pins will provide power and signal.
6. Lock the S8300 Server module into the chassis by tightening the spring-loaded captive
screws on the front of the module.
7. If you are inserting an S8300/B module, replace the plate labelled "Remove before
removing or inserting S8300 module" above slot V1 and tighten the screws on the front of
the plate.
After you have inserted the S8300 Server module, if applicable, insert the rest of the media
modules. Make sure to insert each module in a permissible slot.
!
DANGER:
To prevent access to electrical hazards by unauthorized personnel and to ensure
DANGER:
continued compliance to radiated emissions requirements, all captive screws
must be securely tightened such that they cannot be loosened without the use of
a tool.
38 Installation and Upgrades for the Avaya G450 Media Gateway